Cirrus-logic EP93xx Uživatelský manuál Strana 596

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 824
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 595
16-20 DS785UM1
Copyright 2007 Cirrus Logic
UART3 With HDLC Encoder
EP93xx User’s Guide
1
6
1
6
16
TAB: Transmitted Frame Aborted. (Read/Write)
Set “1” when a transmitted frame is terminated with an
abort. Cleared by writing to a “1” to this bit.
TFC: Transmit Frame Complete. (Read/Write)
Set to “1” whenever a transmitted frame completes,
whether terminated normally or aborted. Cleared by
writing to a “1” to this bit.
TFS: Transmit FIFO Service request. (Read Only)
This bit is a copy of the TIS bit in the UART interrupt
identification register.
0 - TX FIFO is full or TX disabled.
1 - TX FIFO not full and TX enabled. May generate an
interrupt and signal a DMA service request.
Zobrazit stránku 595
1 2 ... 591 592 593 594 595 596 597 598 599 600 601 ... 823 824

Komentáře k této Příručce

Žádné komentáře