Cirrus-logic CS4224 Uživatelský manuál stáhnout pdf (Strana 15)

CS4223 CS4224

DS290F1 15

5. REGISTER DESCRIPTIONS - CS4224

Note: All registers are read/write in I

C mode and write-only in SPI mode, unless otherwise noted.

5.1 ADC Control (address 01h)

5.1.1 POWER DOWN ADC (PDN)

Default = 0

0 - Disabled

1-Enabled

Function:

The ADC will enter a low-power state when this function is enabled.

5.1.2 LEFT AND RIGHT CHANNEL HIGH PASS FILTER DEFEAT (HPDR-HPDL)

Default = 0

0 - Disabled

1-Enabled

Function:

The internal high-pass filter is defeated when this function is enabled. Control of the internal high-

pass filter is independent for the left and right channel.

5.1.3 LEFT AND RIGHT CHANNEL ADC MUTING (ADMR-ADML)

Default = 0

0 - Disabled

1-Enabled

Function:

The output for the selected ADC channel will be muted when this function is enabled.

5.1.4 CALIBRATION CONTROL (CAL)

Default = 0

0 - Disabled

1-Enabled

Function:

The device will automatically perform an offset calibration when brought out of reset, which last ap-

proximately 50 ms. When this function is enabled, a rising edge on the reset line will initiate an offset

calibration.

5.1.5 CALIBRATION STATUS (CALP) (READ ONLY)

Default = 0

0 - Calibration done

1 - Calibration in progress

76543210

PDN HPDR HPDL ADMR ADML CAL CALP CLKE

00000000

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Žádné komentáře

Cirrus-logic CS4224 Uživatelský manuál Strana 15